info at expoworldwide dot com
Manual: SmartPurge II
DOWNLOAD

Download this document so you have it handy whenever you should need it.

Go back to overview

Manual: SmartPurge II


The SmartPurge System must be installed by a competent engineer, in accordance with relevant standards, such as IEC / EN 60079-14 and any local codes or practice.

  • Fit the appropriate orifice plate to the system if required
  • Mount the purge system in accordance with the hook-up drawing.
  • Ensure the system has been installed according to the full instructions in the Installation of the System section of this manual
  • All piping must be clean and free of dirt, condensation and debris prior to connection to the purge system or pressurized enclosure.