Description
Expo’s Minipurge type X range provides a full purge and pressurization solution for electrical enclosures and other equipment installed in Zone 1 or Class I Div 1 hazardous environments. With a range of flow capacities up to 900 Nl/min, the systems are suitable for large enclosures up to 5.4m³ volume. Expo also supply customised purge systems to suit higher flow rates. X purges are automatically operated, with an integral timer to ensure that the purge is carried out for the specified time.
Two configurations are available – Leakage Compensation (LC) and Continuous Flow (CF).
The system comprises:
- Control Unit (CU) – The CU contains the pneumatic logic to monitor and control air flow, pressure and purge timing, and provides the system outputs.
- Relief Valve (RLV) – For systems with the LC configuration, the RLV measures purge flow at the outlet and provides over-pressure protection for the enclosure. For CF systems, the RLV provides over-pressure protection only
- Spark Arrestor Unit (SAU) – For CF systems only, the SAU provides an outlet for the continuous flow of purge gas and provides flow measurement.
Specifications
Air Inlet
Instrument quality air, 4-8 barg
Purge flow rate
Size 1 – up to 225 NI/min
Size 2 - up to 450 NI/min
Size 3 – up to 900 Nl/min
Temperature range
-20°C to +55°C
Purge mode
Leakage compensation (LC) or Continuous Flow (CF) options
Timer power source
IS (Intrinsically Safe) Battery
Signal Outputs
Power interlock, low pressure alarm
Options: Ex e junction box, IS outputs, pneumatic outputs
Certifications
IECEx, ATEX, INMETRO, KOSHA*, EAC, FM, cULus
* Not all certifications apply to all system variants. Check the specific Operating & Maintenance Manual for details.